BTBFN - 135S SHREDDER OIL
- MSDS: BTBFN
- Manufacturer: SHELL OIL CO
- Product Name: 135S SHREDDER OIL
- National Stock Number: 9150-00F032770
Product Identification
Product ID:135S SHREDDER OIL
MSDS Date:10/27/1992
FSC:9150
NIIN:00F032770
MSDS Number: BTBFN
Responsible Party
HOUSTON, TX 77252-2463
US
Cage: SHELO
Contractor
Telephone: 800-231-6950
Cage: 54527
Ingredients
SOLVENT REFINED HYDROTREATED HEAVY PARAFFINIC DISTILLATE,
CAS: 64742-54-7
RTECS: PY8035500
Fraction By Weight: 0-99%
OSHA PEL 5 MG/CUM (MIST)
OIL PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY PARAFFINIC
CAS: 64742-65-0
RTECS: PY8038500
Fraction By Weight: 0-99%
ADDITIVES
Fraction By Weight: <2%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NECROSIS MAY BE EVIDENCED BY DELAYED
ONSET OF PAIN & TISSUE DAMAGE A FEW HOURS FOLLOWING HIGH PRESSURE
INJECTION.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:SKIN & RESPIRATORY DISORDERS
First Aid
First Aid:EYES: FLUSH W/WATER. SKIN: REMOVE CONTAMINATED CLOTHING &
WIPE EXCESS OFF. WASH W/SOAP & WATERLESS HAND CLEANER FOLLOWED BY
SOAP/WATER. IF MATERIAL IS INJECTED UNDER SKIN, GET MEDICAL
ATTENTION PROMPT LY TO PREVENT SERIOUS DAMAGE; DON'T WAIT FOR
SYMPTOMS TO DEVELOP. INHALATION: REMOVE TO FRESH AIR & PROVIDE
OXYGEN IF BREATHING IS DIFFICULT. INGESTION: DON'T INDUCE VOMITING.
(SEE SUPPLEMENTAL DATA)
Fire Fighting
Flash Point:430F
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:DON'T USE A DIRECT STREAM OF WATER. DON'T
ENTER CONFINED FIRE SPACE W/OUT FULL BUNKER GEAR & POSITIVE
PRESSURE SCBA. COOL FIRE EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:PRODUCT WILL FLOAT & CAN BE REIGNITED ON
SURFACE OF WATER. MATERIALS WILL NOT BURN UNLESS PREHEATED.
Accidental Release
Spill Release Procedures:WEAR RESPIRATOR & PROTECTIVE CLOTHING. SHUT
OFF SOURCE OF LEAK IF SAFE TO DO SO. DIKE/CONTAIN. REMOVE W/VACUUM
TRUCKS OR PUMP TO STORAGE/SALVAGE VESSELS. SOAK UP RESIDUE
W/ABSORBENT. FLUSH AREA W/WATE R TO REMOVE TRACE RESIDUE.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES & HIGH TEMPERATURES.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVE ATMOSPHERE-SUPPLYING
RESPIRATOR OR AN AIR-PURIFYING RESPIRATOR FOR ORGANIC VAPORS &
PARTICULATES
Protective Gloves:CHEMICAL-RESISTANT OR NITRILE
Work Hygienic Practices:REMOVE/WASH CONTAMINATED CLOTHING BEFORE REUSE.
WASH W/SOAP & WATER BEFORE EATING/DRINKING/SMOKING/USING RESTROOMS.
Supplemental Safety and Health
DECOMPOSITION: A COMPLEX MIXTURE OF AIRBORNE SOLID, LIQUID,
PARTICULATES & GASES WILL EVOLVE WHEN THIS MATERIAL UNDERGOES
PYROLYSIS OR COMBUSTION. NOTE TO PHYSICIAN: EMESIS INDUCTION IS
UNNECESSARY IN HIGH VISCOSITY, LOW VOLATILITY PRODUCTS.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:-20F
Spec Gravity:0.8735
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE YELLOW OIL W/SLIGHT HYDROCARBON ODOR
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT, OPEN FLAMES & OTHER IGNITION SOURCES
Hazardous Decomposition Products:CO & OTHER UNIDENTIFIED ORGANIC
COMPOUNDS (SEE SUPPLEMENTAL DATA)
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.